Translation and analysis of words by ChatGPT artificial intelligence
On this page you can get a detailed analysis of a word or phrase, produced by the best artificial intelligence technology to date:
- how the word is used
- frequency of use
- it is used more often in oral or written speech
- word translation options
- usage examples (several phrases with translation)
- etymology
raise criticism - translation to English
Ex: The main criticism of the notation that has been voiced in that the notation for more specific subjects can be extremely long.
----
* air + criticism = hacer una crítica
* arouse + criticism = suscitar crítica, levantar crítica
* attract + criticism = ser objeto de crítica
* be subjected to + criticism = ser objeto de crítica, ser criticado
* be (the) subject of/to criticism = ser objeto de crítica, ser criticado
* be under criticism = ser objeto de crítica
* cinematic criticism = crítica cinematográfica
* come in + for criticism = ser objeto de crítica
* come under + criticism = criticar
* constructive criticism = crítica constructiva
* disarm + criticism = invalidar las críticas, desbaratar las críticas
* film criticism = crítica cinematográfica
* formulate + criticism = hacer una crítica
* level + criticism at = dirigir una crítica hacia, hacer una crítica a, criticar a
* literary criticism = crítica literaria
* offer + criticism = hacer una crítica
* raise + criticism = criticar, hacer una crítica, realizar una crítica, suscitar crítica, levantar crítica
* self-criticism = autocrítica
* silence + criticism = silenciar las críticas
* single out for + criticism = acusar, criticar
![marginal note]] between columns one and two) criticizing a predecessor for changing the text: "Fool and knave, leave the old reading, don't change it!"<ref name="MisJ">Ehrman 2005, p. 44.[https://books.google.com/books?id=99chXHGSVH0C&pg=PA44]{{cbignore}}. See also [https://books.google.com/books?id=99chXHGSVH0C&pg=PA56]{{cbignore}}.</ref>](https://commons.wikimedia.org/wiki/Special:FilePath/Codex Vaticanus B, 2Thess. 3,11-18, Hebr. 1,1-2,2.jpg?width=200 "marginal note]] between columns one and two) criticizing a predecessor for changing the text: \"Fool and knave, leave the old reading, don't change it!\"<ref name=\"MisJ\">Ehrman 2005, p. 44.[https://books.google.com/books?id=99chXHGSVH0C&pg=PA44]{{cbignore}}. See also [https://books.google.com/books?id=99chXHGSVH0C&pg=PA56]{{cbignore}}.</ref>")
![Scheme of descent of the manuscripts of [[Pseudo-Apuleius Herbarius]] by [[Henry E. Sigerist]] (1927)](https://commons.wikimedia.org/wiki/Special:FilePath/Howald-sigerist.png?width=200 "Scheme of descent of the manuscripts of [[Pseudo-Apuleius Herbarius]] by [[Henry E. Sigerist]] (1927)")
Ex: A critical edition of a book will be set from a particular basic text, and the chosen original is called the copy-text.
Definition
Wikipedia
A raise borer is a machine used in underground mining, to excavate a circular hole between two levels of a mine without the use of explosives.
The raise borer is set up on the upper level of the two levels to be connected, on an evenly laid platform (typically a concrete pad). A small-diameter hole (pilot hole) is drilled to the level required; the diameter of this hole is typically 230mm - 445mm (9" - 17.5"), large enough to accommodate the drill string. Once the drill has broken into the opening on the target level, the bit is removed and a reamer head, of the required diameter of the excavation, is attached to the drill string and raised back towards the machine. The drill cuttings from the reamer head fall to the floor of the lower level. The finished raise has smooth walls and may not require rock bolting or other forms of ground support. One impressive use of raise boring is the 7.1 m diameter shafts for Sasol's Middelbult and Bosjesspruit Mines in South Africa.
The boxhole borer (or machine roger) is a variant of a raise borer that is used when there is not enough space on the higher of the two levels to be connected. The boxhole borer is set up on the lower level, drills a pilot hole as a guide, then drives the reamer bit along the pilot hole from the lower level to the upper. Precautions have to be taken to redirect falling drill cuttings away from the machine, and to reinforce the drill string.
